WE'VE SAID IT BEFORE: if you're interested in astronomy you ought to keep a pair of binoculars handy, no matter what other instrument you may have. Binoculars are the ideal "small telescope" with their wide field, low cost, simple use, total portability, and their respectable performance about halfway between that of the naked eye and a 6- to 10-inch scope used at 50 to 100 power.
But some binoculars are better than others. The requirement that's always stressed for astronomy is big aperture -- big front lenses -- to collect lots of light. Most astronomical objects, after all, are hard to see not because they are small and need a lot of magnification, but because they are dim and need a lot of aperture.
That's only part of the story, however. Magnification should get more attention than it usually does. In fact, when it comes to determining how much binoculars will show in the night sky, power counts exactly as much as aperture.
That, at least, is the radical conclusion drawn by Roy L. Bishop, editor of the annual Observer's Handbook of the Royal Astronomical Society of Canada (RASC). Bishop analyzed what's important in celestial binoculars, especially under today's light-polluted skies, and came up with an all-purpose "visibility factor." A binocular's night-sky performance, it turns out, is most accurately rated in a very simple manner. Just multiply the aperture times the power. That's the visibility factor.
"In fact," Bishop told an audience at the RASC's 1993 General Assembly, "It's engraved right there facing you on the back of the binoculars."
A pair of 7 × 50s, for instance, gets a rating of 350. This means
7 × 50s actually perform a little less well for astronomy than smaller
10 × 40s, which get a visibility rating of 400. Such a claim flies
in the face of decades of conventional wisdom. "But," noted Bishop, "it
agrees with my own experience."
Nobody questions that high power helps on objects that demand fine resolution,
such as close double stars, Jupiter's moons, lunar details, and resolving
stars in open clusters. But as Bishop points out, it also helps on traditionally
low-power objects such as very dim galaxies and faint, unresolvable clusters.
The reason is sky brightness, especially in light-polluted areas. Telescope
users know that switching from low to high power will gain you a magnitude
or more of faint stars. This works because high power reduces the surface
brightness of the entire field by spreading out the light. Doing this
dims the sky background without affecting the total amount of light
arriving from small, discrete objects.
Stars appear so tiny that their surface brightness hardly looks changed
at high power. But even an already dim, diffuse galaxy won't be rendered
any less visible when its surface brightness is lowered (at least within
reasonable limits), because the galaxy's contrast with the sky remains
the same. You're actually likely to see it better, because your
eye perceives low-contrast objects better when they are large. The neural
network in your retina is smart enough to gather and correlate the galaxy's
light from a wide area. Deep-sky vision is quite different in this regard
from the behavior of "dumb" photographic film, which responds to surface
brightness only.
Several other factors also make high power good for astronomical binoculars.
The first is the size of your eye's pupil. Any optical instrument you
look through should have an exit pupil no larger than your eye's
own dark-adapted pupil, and preferably somewhat smaller, if you want to
use the instrument to full advantage. The exit pupil is the little disk
of light you see floating in the air just behind the eyepiece when you
look at it from a foot or so away. (Point the instrument at a bright surface,
such as an indoor wall or the daytime sky.)
To find the exit pupil's diameter, just divide the aperture by the power.
For instance, 10 × 50 binoculars give a 5-millimeter exit pupil.
It was long repeated that the best exit pupil for night work is 7 mm
in diameter, because this is how wide the eye opens in dim light. No more.
Many people's pupils open no wider than 5 mm, especially by middle age
or later. In this case part of the aperture is wasted, exactly as if you
put aperture stops over the front lenses. Some of the light beam just
won't fit into your eyeball.
Even if you are blessed with 7-mm or larger pupils at night, you really
don't want to use their outermost edges. The edges of most people's pupils
have uncorrectable optical aberrations in the lens and cornea; these add
flares and rays to stars. Moreover, light coming through the edges of
your pupil is perceived as dimmer than the same amount of light coming
through the center -- perhaps evolution's way of suppressing the flares
and blurring somewhat. In addition, you have to keep your eye precisely
aligned with the instrument or, once again, you'll block off aperture.
Five-millimeter exit pupils are better, by and large. You won't see
the dense splendor of a richest-field Milky Way as viewed by very young
eyes, but you'll gain in most situations. To shrink the exit pupil, raise
the power.
High power in binoculars does have its drawbacks. The first and worst
is that it magnifies the wiggling of your hands. For this reason I find
10× about the limit for hand-held binoculars (except for the new
image-stabilized variety, which even at 18× can be hand held). Even
6× glasses offer vastly increased sky performance if you can brace
them rigidly against something or mount them on a tripod.
Second, high power narrows your field of view. The 5° field in
typical 10× binoculars encompasses only half as much sky area as
the 7° field in 7× glasses with similar eyepiece design. A wide
field is a big help, especially for beginners trying to match what they
see to patterns on a star atlas.
Third, high power magnifies optical aberrations and misalignments. If
budget binoculars give stars annoyingly obvious spikes and flares, why
magnify the problem? Fine performance even at moderately high power is
one of the reasons why quality is crucial in binoculars intended for astronomy.
Finally, don't imagine that you can get the best of all worlds by buying
variable-power zoom binoculars. Such instruments are expensive compromises
at best and sloppy kludges at worst. They never seem to perform as well
as glasses that were designed for a specific power from the outset.
Of course, there's more to a binocular's performance than its power-times-aperture
rating. Highly desirable are fully multicoated lenses and prisms; these
increase light throughput by about a third compared to bottom-of-the-line
"coated" optics, and they reduce internally scattered light by a much
greater factor. Top-quality optics and mechanical integrity are also well
worth a higher price.
But none of this is meant to discourage. Any binoculars you may have,
whatever their limitations, will open up a lifetime of sky exploration
when used with a good star atlas and observing handbook. Their capabilities
seem especially marvelous when you consider that for thousands of years,
astronomers drew all their knowledge and inspiration from the ridiculously
tiny 1 × 7 binoculars (more or less) that they were born with.
Alan MacRobert is an associate editor of Sky & Telescope magazine
and an avid backyard astronomer.
The astronomical performance
of binoculars can be rated at a glance. Just multiply the power (the first
of the two numbers in a designation like "8 × 50") by the aperture
(the second number, given in millimeters). The product is the visibility
factor, according to Roy L. Bishop. S&T photograph by Chuck Baker.
Click on image for larger view.
The visibility factor
for different apertures and magnifications. Each red line represents a constant
visibility factor; binoculars along one of these lines should perform equally
well on the night sky. The straight diagonal lines represent constant exit
pupil sizes (and therefore sky surface brightnesses). Dots mark common binocular
models. The arrows at lower right indicate the directions in which various
properties increase most rapidly. Courtesy Roy L. Bishop. Click on image
for larger view.
[ Sky Publishing's Company Page | Guide to Backyard Astronomy ]
®Sky Publishing Corporation
49 Bay State Road, Cambridge, MA 02138, U.S.A.
Phone: 800-253-0245 (U.S./Can.), +1 617-864-7360 (Int'l.)
Fax: +1 617-864-6117; E-mail: skytel@skypub.com
© 2000 Sky Publishing Corp. All rights reserved.